• //New Device > Chameleon Ultra remote: BLE central app that auto-connects, subscribes and reads device info the moment you open it, and auto-reconnects if the link drops
• //Full dashboard — VERSION / MODE (tap to toggle EMULATOR ⇄ READER) / BATTERY (% + mV) / SLOT 1–8 (SLOT- / SLOT+)
• //READ HF (ISO14443-A UID/ATQA/SAK) and READ LF (EM4100 tag ID); EMU HF / EMU LF write and enable the active slot for MIFARE Classic 1K or EM4100 emulation
• //Connection rewrite: matches the Chameleon by name OR advertised service UUID, tries Nordic UART Service first with 0xC760 legacy fallback, and accepts the real STATUS_SUCCESS (0x68) so BATTERY/MODE/VERSION populate
• //No-blink partial redraws, live USB-serial scan diagnostics, and a permanently visible full-width BACK key
• //Carries everything R119–R143: splash boot-loop fix, BLE crash guard, BadUSB suite, wardrive fixes, MAC Monitor, SSID Generator, Scan AP survey, Flock dashboard, GPS SIGNALS/BEST dB meter, Matrix default theme, 40 MHz display

• //Matrix (phosphor-green terminal) is now the factory-default theme — splash art, dashboards, tiles and status pills
• //Your saved theme choice is still remembered and wins; pick Matrix once in Device > Theme to switch a saved choice
• //All four themes remain available in Device > Theme: Watch Dogs, Matrix, Cyber 2077, Spider
• //Carries everything R119–R142: splash boot-loop fix, BLE crash guard, BadUSB suite, wardrive fixes, MAC Monitor, SSID Generator, Scan AP survey, Flock dashboard, GPS SIGNALS/BEST dB meter, 40 MHz display, SD update progress bar

• //Wardrive now runs as a first-class SHARK dashboard — live tiles (networks / BLE / SATS), survey log panel with GPS state and position
• //CH-/CH+ merge into one wide cyan TAG POI key; PAUSE/RESUME and BACK keep their places and actually respond
• //Legacy Marauder wardrive painter and its full-width POI tap interception removed on V8 — no more overpainted screens or eaten taps
• //Same WiGLE CSV, GPS, SD and channel-hop logging as before — only the screen changed

• //BadUSB suite taps register — screens now use the true-touch threshold instead of the default that ate light taps through the case
• //List rebuilt with taller rows and a wide BACK key — every target is hittable and exit always works
• //Tool set and payloads unchanged from R120; BLE crash guard still active

• //Multi-use BadUSB tool suite: tool list with parameterized payloads instead of one-shot scripts
• //Launches through the R119 BLE crash guard; OTA slot stays just under the 3,342,336-byte limit

• //BLE start-up removed from boot — no more splash loop when the stack fails to init
• //First BLE use is crash-guarded; everything else unchanged from R118

• //Fixes the R117 splash boot-loop: the Arduino NimBLE library folder was being externally swapped mid-builds (1.4.3 vs 2.x), and R117 linked mixed objects
• //NimBLE-Arduino 2.5.1 is now pinned inside the project (.build-libraries) — builds are reproducible again (same size twice)
• //Carries every fix: Device Info back, true-touch keys, instant STOP, BLE scan window, IQ Family Watch

• //BAD BUILD — splash boot-loop on real hardware (library swap corrupted the link). Superseded by R118
• //The Device Info back-button fix itself was correct and is included in R118

• //STOP and BACK on the BLE prank screens now react the instant you tap them — scans used to block the loop for 1.2–2 s
• //BLE Radar / BLE Hunt / Shark Hunt run a continuous non-blocking scan; the list redraws at ~2.5 FPS and refreshes every 8 s
• //Device reports its own version; Marauder credit unchanged

• //BLE Radar / BLE Hunt / Shark Hunt now actually find devices — the scan window defaulted to 0, so the radio never listened
• //All prank scan setups now use the same proven interval/window pair as the BT tools
• //Everything from R112: IQ Family Watch, audit trail, PIN lock, attack cap

• //Full-screen FAMILY DEVICE DETECTED alert when a SharkDeck joins the M5SHARK access point
• //Measured proximity: live station RSSI in dBm, VERY CLOSE / NEAR / IN RANGE, 5-bar meter
• //Cyber Defense > IQ Family Watch toggle (default on, 60 s re-pop cooldown)
• //SharkDeck OS announces itself once, only on M5-SHARK networks — nothing on other Wi-Fi

• //GPS-timestamped audit trail on SD for every transmit session
• //Attack PIN lock and attack time cap for all transmit apps
• //One-tap session reports; 19 Cyber Defense detectors on real detection state
• //Paused-first dashboards with in-app scanning for all 13 transmit tools

Download current binaries

update.bin is the SD-card OTA image (Device → Update Firmware). The other four are the CLI flash set — always the current release (R150).