BRUCE FIRMWARE FOR ESP32-DIV - VERSION 1.0
==========================================

QUICK START
-----------
1. Unzip this folder anywhere on a Windows PC
2. Connect the ESP32-DIV with a USB DATA cable
3. Double-click  FLASH-BRUCE.bat
4. Wait for "FLASH COMPLETE" (about 1 minute) - done!

Read FLASH-GUIDE.pdf for the illustrated guide, controls and troubleshooting.

CONTROLS
--------
UP / DOWN / LEFT / RIGHT : navigate
SELECT short press       : open
SELECT hold ~1 second    : back / exit
Touch screen             : calibrates automatically on first start
                           (units without a working touch panel use the buttons)

CONTENTS
--------
FLASH-GUIDE.pdf ......... full illustrated guide
FLASH-BRUCE.bat ......... one-click flasher (double-click)
Bruce-esp32-div.bin ..... the firmware (used by the flasher)
esptool.exe ............. standalone flashing tool, nothing to install
stock-firmware/ ......... original ESP32-DIV firmware + RESTORE-STOCK.bat

NOTES
-----
- microSD card (FAT32) optional, for saving captures and logs.
- NRF24 module is auto-detected in any of the 3 sockets at every start.
- If no COM port appears, install the CP210x driver:
  https://www.silabs.com/developer-tools/usb-to-uart-bridge-vcp-drivers

LEGAL
-----
Offensive-security toolkit for LEGAL AND AUTHORIZED testing only.
Only use on networks and devices you own or have permission to test.
